Multiparameter Meter: Benchtop pH Meter - pH -2 to 20 - 0.001 µS/cm to 2000 mS/cm

Introduction

Running separate meters for pH, conductivity and dissolved oxygen takes bench space and splits your records across devices. The modular four-parameter Mettler Toledo NineFocus NF2340 Multiparameter Meter measures pH, ORP, conductivity and DO in one modular benchtop system, with three sensors included.

Technical Specifications

The figures below come from the manufacturer's data. The core specifications for the Mettler Toledo NineFocus NF2340 Multiparameter Meter are:

• Model: NineFocus NF2340 Kit
• Material No.: 30997017
• Parameters: pH, ORP, conductivity, dissolved oxygen (DO)
• Channel: multi-channel
• Sensors included: InLab Expert Pro-DES, InLab 731 Pro-DES, InLab OptiOx Pro-DES
• pH measuring range: -2.000 to 20.000
• pH resolution: 0.001 / 0.01 / 0.1
• pH accuracy: ±0.002
• mV resolution: 0.1 / 1
• mV accuracy: ±0.1
• Temperature range: -30 to 130 °C
• Temperature resolution: 0.1 °C
• Conductivity measuring range: 0.001 µS/cm to 2000 mS/cm
• Conductivity resolution: 0.001 to 0.1
• Conductivity accuracy: ±0.5%
• DO measuring range: 0.000 to 50 mg/L (ppm)
• DO resolution: 0.001
• DO accuracy: ±0.1 mg/L (0 to 8), ±0.2 mg/L (8 to 20), ±10% (20 to 50)
• mV measuring range: -2000 to 2000 mV
• Temperature accuracy: ±0.1 °C between 0 and 100 °C
• Memory: 3000 result sets
• Data transfer: PC, printer, USB stick
• Connectors: USB A, USB C, ALTW 4PIN, LAN, Mini-DIN, HSD
• Protection rating: IP52
• Display: 7 inch color TFT touch screen
• Dimensions: 111 x 178 x 325 mm
• Weight: 1790 g

Standard Accessories Included

• 3 measurement modules
• InLab Expert Pro-DES, InLab 731 Pro-DES and InLab OptiOx Pro-DES sensors
• Electrode arm
• Standards for initial calibration

Items Excluded

• Printer
• LabX software
• Stirrer and barcode reader
• Sensors for semisolid samples, confirmed at quotation

Pre-installation Requirement

• A PC with a free port if LabX software will be used.
• Electrical requirements are confirmed at quotation.

Key Benefits

Several daily bottlenecks ease when you work with the compliance-ready Mettler Toledo NineFocus NF2340 Multiparameter Meter.

Efficiency

Automatic data transfer to LabX avoids manual transcription, and results are checked with a single click.

Accuracy

pH accuracy of ±0.002 and conductivity accuracy of ±0.5% support demanding QC work.

Safety and comfort

Sensor diagnostics guide troubleshooting and monitor sensor condition, and the IP52 rating protects against limited dust and water drips.

Read more on the Mettler Toledo NineFocus NF2340 Kit page. You can also compare it with our benchtop pH meter kit.

Key Features

• Measures up to 4 parameters with the built-in modules
• Detachable terminal with 7 inch touch screen
• Sensor diagnostics with troubleshooting guidance
• One Click user interface in 14 languages
• Analog module for compatibility with analog and ISM sensors

Solving Common Lab Problems

Tired of juggling three meters for one sample? The Mettler Toledo NineFocus NF2340 Multiparameter Meter for daily lab work covers pH, conductivity and DO on one terminal.

Facing data integrity audits? User management and LabX transfer support 21 CFR Part 11 and ALCOA++ requirements.

Warranty & Support

We provide a 1-year manufacturer's warranty covering parts and labor. Technical support, installation assistance, and operational training are also available. Replacement parts and consumables are available throughout the product's service life.

Request a Quotation or Technical Datasheet

Contact us about the reliable Mettler Toledo NineFocus NF2340 Multiparameter Meter for your lab for more information, customized configurations, and solutions tailored to your specific requirements.