Achieve Precision in Handheld Water Quality Analysis

In the demanding field of wastewater management and industrial water treatment, obtaining immediate and accurate data is essential for maintaining regulatory compliance and operational efficiency. The Reliable Hach TSS Portable Handheld Meter performance provides environmental engineers with a definitive tool for on-site analysis. This rugged, compact system is designed to measure turbidity, total suspended solids (TSS), and sludge blanket levels within a single, integrated platform. By utilizing advanced infrared multi-beam technology, researchers and engineers can achieve high-reproducibility results even in the most challenging field conditions.

Overcoming Critical Field Measurement Challenges

Are you currently struggling with unreliable measurements or equipment that fails in harsh environments? Water treatment professionals often face obstacles that compromise data integrity and slow down decision-making. The Versatile Hach TSS Portable Handheld Meter solution addresses these primary laboratory and field pain points:

• Eliminating Delayed Decision-Making: Transporting samples to a laboratory can take hours or even days. This handheld system provides instant results, allowing for proactive process adjustments and immediate troubleshooting.

• Correcting Air Bubble Interference: Measurement errors are common in aerated samples where bubbles mimic particles. The integrated automatic bubble compensation feature ensures that readings remain consistent and noise-free.

• Consolidating Multiple Instruments: Carrying separate tools for different parameters is inefficient and physically demanding. This device combines three critical measurements—turbidity, solids, and sludge levels—into one lightweight unit.

• Extending Field Deployment Time: Fieldwork is often disrupted by short battery life and frequent recharging. With up to one month of typical use on a single charge, this meter is built for extended deployments in remote locations.

• Ensuring Hardware Durability: Sensitive probes often fail in industrial settings due to scratches or pressure. The polished stainless steel probe with a sapphire window is scratch-resistant and built to withstand pressures up to 10 bar.

Strategic Benefits for Water Treatment Professionals

Integrating Advanced Hach TSS Portable Handheld Meter technology into your monitoring routine offers significant technical advantages that translate to long-term cost savings and improved safety.

• Superior Precision in the Field: Accuracy is a non-negotiable requirement for environmental compliance. This analyzer delivers precision better than 3% for turbidity and 4% for suspended solids, ensuring your on-site data is comparable to high-end laboratory results.

• Enhanced Data Traceability: Keeping track of multiple sampling points is simplified through the internal memory, which stores up to 290 readings. Each data point includes a timestamp, location ID, and homogeneity details for audit-ready reporting.

• Customized Matrix Calibration: While the unit comes factory-calibrated for turbidity, it allows for up to four user-defined curves for solids. This flexibility ensures the instrument adapts to the unique sample characteristics of your specific site.

• Low Maintenance Requirements: The high-quality materials, including a sapphire window and polished stainless steel, resist particle adhesion and corrosion, significantly reducing the total cost of ownership over the life of the instrument.

Detailed Technical Specifications

The precision of the Hach TSS Portable Handheld Meter is defined by the following engineering parameters:

• Parameters Measured: Turbidity, Suspended Solids (dry matter), and Sludge Blanket Level

• Measurement Technology: Combined multiple-beam alternating light with IR diode (860 nm)

• Turbidity Measuring Range: 0.001 to 9999 FNU/NTU

• Suspended Solids Measuring Range: 0.001 to 400 g/L (matrix dependent)

• Turbidity Resolution: 0.001 (0–0.999 FNU), 0.01 (1–9.99 FNU), 0.1 (10–99.9 FNU), 1 (>100 FNU)

• Solids Resolution: 0.001 (0–0.999 g/L), 0.01 (1–9.99 g/L), 0.1 (10–99.9 g/L), 1 (>100 g/L)

• Turbidity Precision: Less than 3% or plus or minus 0.02 FNU

• Solids Precision: Less than 4% or plus or minus 0.001 g/L

• Turbidity Reproducibility: Less than 4%

• Solids Reproducibility: Less than 5%

• Measurement Units: FNU, NTU, EBC, ppm, mg/L, g/L, percent

• Sample Temperature Range: 0 to 60 degrees Celsius (briefly up to 80 degrees Celsius)

• Maximum Operating Pressure: 10 bar

• Operating Modes: Single, Interval (with auto shut-off), and Continuous

• Integration Time: Adjustable from 0 to 1000 seconds

• Data Storage Capacity: 290 values with date, time, and location

• Interface Type: RS485 serial connection

• Power Supply: 6x rechargeable NiMH AA batteries

• Battery Life: Up to 1 month typical use or 4 hours continuous operation

• Protection Rating: IP68 for the probe and IP55 for the control unit

• Probe Dimensions: 40 mm diameter and 29 cm length

• Cable Length: 10 meters with depth markings

• Total Instrument Weight: 1.6 kg for the probe and 0.56 kg for the controller

Complete System Integration

Every Hach TSS Portable Handheld Meter comes as a comprehensive kit to ensure you are ready for immediate deployment. The package includes:

• High-precision TSS handheld control unit

• Stainless steel TSS probe with 10-meter cable

• Set of 6 rechargeable NiMH batteries

• Rugged, shockproof carrying case

• Full technical user manual

Elevate Your Monitoring Standards Today

Don't let instrumentation limits define the quality of your research or the safety of your water systems. By choosing a professional-grade handheld analyzer, you invest in a versatile, high-durability tool that reduces operational costs and enhances field productivity. Contact our technical team today to request a quote or to learn more about how this system can benefit your facility.

Request a Technical Quote | Download Product Datasheet | Contact a Water Analysis Specialist